Such as electrical tester for voltage and current is used to measure the value of users know, traditionally the process is time consuming and a potential risk.雷竞技appFluke T6 electrical tester provides a faster and more safe way, access to distribution board of the electric reading, junction box, and other applications.These tools can be through the sensor opening tongs in the electric field, allowing you to easily measured.Have new FieldSense technology, T6 make measurements more security, you can use the pliers opening up to 1000 V ac voltage measurement.雷竞技appFluke T6 electric meter can measure the voltage and current at the same time, without having to open the cover or remove the terminal nut, allows you to measure more quickly and effectively.In addition, the opening tongs in the industry's most wide, can measure up to 4/0 AWG (120 mm2), the load current of 200 A wire.Commercial and light industrial electrician electrical tester can use T6 basic troubleshooting, validation work voltage and on-off value, and test a single circuit, at the same time without test wire fast measuring current and voltage.These devices can be easily into a pocket, convenient all industry first-line electrical use.Common applications include testing:
- Catheter and junction box of the wires
- Into the power supply circuit of the motor (maximum 200 ampere)
- Distribution board (4/0 wire winding)
- HVAC equipment
- Open circuit
- Catheter box (using the black wire)
Electrician is often met with wire junction box, in this case to find the right connection point is a challenge.Use of T6-600 or T6-1000, you only need to slip into a wire clamp can be measured.T6 electrical tester can not only for testing.In fact, its without testing wire measuring ac voltage, current and frequency.Use the attached test conductor, the tool also can measure ac/dc voltage, resistance and on and off.T6 electrical tester采用 FieldSense 专利技术，可让执行测试的电工或技术人员更安全地测量电压源。FieldSense 技术通过电缆的绝缘来测量电压，可降低用户接触金属导体的风险，并减少出现错误或意外接触错误导体的可能性。该技术通过注入已知信号来准确得出未知交流电压。与只是感应磁场的传统非接触式电压检测仪相比，该技术可测量实际交流电压。传统上，使用测试导线探测或将鳄鱼夹连接到电路时，需要金属与金属连接。FieldSense 技术允许 T6 电气测试仪无需接触带电电压即可测量电压、电流和频率。请注意，这要求用户通过电容式路径接地，方法是接触电池盖背面的圆形接触点，在许多应用中这样就足够了。在一些应用中，用户没有明确的路径接地，可能需要通过随附测试导线接地。
FieldSense measurement, charged or the best location for the neutral conductor for the center with openings at the bottom of the clamp.Placed open clamp, just with one hand and a conductor into open jaw.T6-1000 LCD display screen can display voltage and current measurements at the same time, also can press a button to manually choose according to frequency.Need to configure tool or search metal test points.Displays green, namely that FieldSense with reliable electric signal.If the voltage is greater than 30 V circuit, then the triangle voltage indicator light (in lightning icon marking) will become red.Please note that if the user wear insulating gloves, highly insulating boots, or standing on the ladder insulation, may not be accurate.These situations irfpa need connect grounding conductor to confirm reliable readings.This need to make the attached black wire contact with the grounding conductor (such as a catheter or junction box).FieldSense technology is used to measure the ac voltage and ac current steps:
- Turn the knob to the second position or "FieldSense" function.T6-1000 tester can measure and display alternating voltage and alternating current at the same time, the default display and T6-600 ac current, must use the yellow switch button to switch to the ac voltage.
- When using the touch pad finish ground, insert the black probe test equipment on the back of the storage tank.If wear insulating gloves, standing on the ladder insulation, insulation or otherwise and ground, then please put the black test lead in a grounded conductor, or use the alligator clip connect the black test lead to the earth.
- Look at reading, record unit of measure.
- Press the HOLD button (keep) a temporary freeze on reading, for reading the screen snapshots.
Remember, through the traditional metal contact method measuring ac/dc voltage, and measure the phase voltage, must use the attached test conductor.The probe end and through the load or the power supply circuit in contact (with the circuit in parallel).T6-600 of 600 V CAT III, T6-1000 for the CAT CAT III rating of 1000 V / 600 V IV.
T6-1000 can be measured 1 Ω Ω resistance to 100 k, and can measure 1 Ω T6-600 to 2000 Ω resistance.Measuring steps:
- Close the circuit power supply under test.
- Turn the selector to Ω.
- Make the probe end contact specify the component or circuit parts.
- See the readings.
- If reading is below 40 Ω, emits an on-off sound the alarm.
Although the electrical measurement of safety improvements to the T6 electrical tester, but workers should still wear appropriate personal protective equipment (PPE).This means that the electrical arc should still wear protective clothing and gloves, goggles, hearing protection and leather shoes and other protective equipment.In the low pressure area, at least can wear the personal protective equipment (including gloves and goggles) measurements.But without testing measurement of the wire does not mean that you can not wear required personal protective equipment.The national fire protection association (NFPA) standard 70 e of the definition of personal protective equipment category complete list are shown in table 130.7 (C) (16).Greater electrical hazards requirements can be defensive arc accident arc higher levels of personal protective equipment.
For no load of electric circuit, you can measure ac circuit electrically charged.T6 electrical tester可帮助您排除故障，可让您发现哪些电线带电，即使电路（无论是灯具、电机还是电灯）为非工作电路也可以。这可让电工测试带电压的电线和排除开路电路故障。
