雷竞技app福禄克820 - 2频闪
雷竞技app福禄克820 - 2频闪是额定的5通过1。
关键特性
- 坚固,紧凑,易于使用的频闪仪检查机器的转速没有身体接触或反光带的必要性
- 高强度特性7-LED数组- 4800勒克斯@ 6000 FPM / 30厘米
- 提供了一个高效的LED固态光源均匀flash特色,允许更高的flash利率- 30 - 300000 FPM(每分钟闪烁)
产品概述:福禄克820 - 2频闪雷竞技app
调查和观察潜在的机制与信心失败
确定转动设备的运行速度是困难的,但领导的福禄克820 - 2频闪仪简化了过程允许您执行停装置诊断实际上没有停止,或接触,你工作的机器。雷竞技app你是否试图诊断寄生振荡,滑动,或不必要的扭曲,频闪是理想的前线领导的820 - 2故障排除,过程或产品研究和开发工具。
其他有用的特性:
- 包括数字脉宽调制图像在高速异常锋利
- 提供坚固、耐用的设计,使用固态发光二极管没有细丝,气体,中空腔,或玻璃;(下降1米测试)
- 高精度特性quartz-accuracy控制系统- 0.02%(+ / - 1位)
- 提供了一个多行液晶显示屏
- 包括提前或延迟闪光时间查看齿轮的牙齿,切割表面,重复,或者漂浮设备
- 功能简单的按钮操作2 x和÷2按钮,便于调整
规格:福禄克820 - 2频闪雷竞技app
| 机械规范 | |
| 大小(HxWxL) | 5.71 cm x 6.09 cm x 19.05 cm |
| 2.25 x 2.4 x 7.5 | |
| 重量 | 0.24公斤 |
| 环境规范 | |
| 工作温度 | 0°C + 45°C |
| 储存温度 | -10°C + 50°C |
| 操作湿度(没有ondensation) | 不结露(< 10°C) |
| 90% RH (10°C到30°C) | |
| 75% RH (30°C到40°C) | |
| 45% RH (40°C到50°C) | |
| 吸收/腐蚀 | 30°C, 95% RH, 5天 |
| 产品功能正常 | |
| 操作高度 | 2000米 |
| 存储高度 | 12000米 |
| 振动 | mil -脉冲重复频率- 28800 f类2 |
| 耐冲击 | 下降1米 |
| EMI、RFI EMC | EN61326-1:2006 |
| 安全合规 | |
| 机构的批准 | CE |
| 第三类(都)污染程度2 | |
| 各种各样的规格 | |
| 闪光频率 | |
| 范围 | 30至300000 FPM |
| 0.5到5000赫兹 | |
| 精度 | 0.02% |
| 决议 | 30到999 FPM = 0.1 |
| 1000 - 300000 = 1 | |
| 0.5赫兹到999赫兹= 0.1 | |
| 1000赫兹到5000赫兹= 1 | |
| 频率设置 | FPM或赫兹 |
| 闪电脉冲 | |
| 持续时间 | 可调μs或度 |
| 延迟 | 可调μs或度 |
| 光 | |
| 颜色 | 大约6500 K |
| 发射输出 | 4800 lx @ 6000 FPM 30厘米 |
| 外部触发 | |
| 方法 | 连接外部控制触发器 |
| 高水平 | 3 V到32 V |
| 低的水平 | < 1 V |
| 最小脉冲宽度 | 50μs连接 |
模型:福禄克82雷竞技app0 - 2频闪
额定3的5通过点的人从大小不错,速度调整不好,耐久性好
如果你正在寻找一些检查一个弹性体耦合,一个链,或传动皮带在设备运行时,你已经知道了速度,没有更好的在你的口袋里。在这方面确实很好下午检查运行设备。和我很高兴它大约3 - 4年的使用。最大的加这个闪光灯是大小……与其他因素无关。这也是一个简单非笨重的方式检查电机旋转方向,已经运行。拨RPM,然后低了约5 RPM和电扇或轴的方向似乎是在是实际的旋转方向。最大的缺点是使用+ / -按钮为零的RPM是非常令人沮丧的。变速率的增加你按住按钮长,就像一个指数增加。如果你需要移动超过100 fpm,算了吧… you are going to overshoot or undershoot the speed you are trying to get. The user settings should have included something that limits or adjusts the rate of change with the +/- buttons. If I wanted to increase the speed as fast as it would go, I would have used the 2x multiplier buttons with a few clicks--there is just no need for the +/- buttons to move the FPM's so quickly. This makes it very hard for some people to zero in on the correct FPM and I see many instances where someone thinks that the equipment was running at a 3x multiple of what it actually was and that never was a problem with the old fashioned strobe lights with the knob. I'd say that the durability isn't the best given the battery holder as a weak point. A mechanic broke the first one within 6 months. by dropping it which damaged the battery terminal "spring" (for lack of a better term) which subsequently broke off when trying to bend it back in place. I got it working again with some aluminum foil and had to order a 2nd strobe as backup. Everything else seems to be holding up good though. The cost is a bit high, but I figure what you are paying for is the convenience factor of the size. And as we all know, convenience, or lack there of us a strong indication of whether someone is actually going to want to use it without a lot of motivation.
发表日期:2019-09-12