Industry solutions
The lithium battery
New energy
Grid power
Education scientific research
rail traffic
Petroleum chemical industry
Automobile manufacturing
Electronics manufacturing
Electrical appliances manufacture
Measurement test
Iron and steel metallurgy
The data center
semiconductor
Food and beverage
Aeronautics and astronautics
Industrial automation
Online customer service
returnIndustrial endoscope雷竞技appFluke DS703FC
-
With front and side of high-resolution probe of dual cameras
-
Convenient 7-inch LCD screen view
-
Up is Up ™ regardless of the probe orientation, the screen can be adapted to the rotating screen, real-time positive images (only 1.2 meters probe)
recorderDP5
-
Equipped with special heat insulation box, can put the cavity together with the product
-
Experience and recorded the whole process of temperature change, and the uniformity of temperature in the oven
-
Ensure the whole oven was in the best processing temperature range.
High precision thermometerEndurance series
-
The highest can test 3500 degrees high temperature
-
High precision, long-term use of stability is good
Eight and a half desktop DMMS8558 a / 8588 a
-
Provide more than eight and a half meter voltage test, and has the transfinite alarm
-
Capacity test with a timestamp function, can record to charge and discharge time
-
Provide trend analysis function
On-line infrared thermometerMI3
-
Uniform, continuous online monitoring, real-time alarm for abnormal temperature
-
Bad sector monitoring, the fast positioning location
-
The production data of continuous recording, convenient back bad and the analysis of process parameters
The rf power analyzerNorma 6000 series
-
Double machine connected: guarantee from input to output, dc to ac full cover, can be extended to 8 channels
-
Portable design: 50% lighter, life up to 10 hours
-
Security levels up to 1000 v / 600 v IV CAT CAT III
-
Measuring power, photovoltaic inverter efficiency and harmonic analysis, help power generation side lift efficiency
A power quality analyzer雷竞技appFluke 1777
-
The built-in reporting features, a key issue the GB report
-
Powerful functions: remote communication, operation, analysis the transient voltage sampling rate as high as 20 ms/s, peak + 8 kv;
-
DC ~ 30 KHZ bandwidth super harmonic measurement: add 2 to 9 KHZ high frequency harmonic, 9-30 KHZ super harmonic
-
Don't try all Chinese interface, automatic current clamp, automatic correction of the wrong wiring
1500 v clip-on table雷竞技appFluke 393 FC
-
Dc 1500 v voltage range, specially designed for photovoltaic and wind power
-
Integrated power measurement function, get twice the result with half the effort
-
CAT III 1500 v safe level, support data
The infrared thermal imager雷竞技appFluke TiS75 +
-
384 * 288 pixels, offer excellent image quality
-
- 20 to 550 ℃ range, suitable for most equipment maintenance and development quality control occasions
-
DC ~ 30 KHZ bandwidth super harmonic measurement: add 2 to 9 KHZ high frequency harmonic, 9-30 KHZ super harmonic
-
Avoid focusing + manual focus, long-distance scanning big goals/close small target detection, fast switching
Color digital oscillographic table雷竞技appFluke 190-202 - III
-
That touch namely, without complicated Settings, automatic capture, review and analysis
-
Both portable and durable and desktop precision of oscilloscope
-
Software blessing, remote control, can use the software to check the analysis data
.png)
The infrared thermal imagerTi480 PRO
-
Can pick up camera, multipoint and laser af speed quickly find and discover hot spots or the temperature of the electrical equipment abnormal points, promptly eliminate temperature anomalies.
Sunlight irradiance meter雷竞技appFluke IRR1 SOL
-
Measuring solar irradiance, the environment temperature and photovoltaic components, array direction and tilt Angle.
-
According to the IEC 62446-1 standard, instantaneous measurement to determine solar irradiation on the number of watts per square metre.
Acoustic imager雷竞技appFluke ii900
-
Equipped with a series of microphones to expand the scope of inspection, rapidly and accurately locate the compressed air system of air, gas, and the vacuum leak, even in a noisy environment.
-
7 inch LCD touch screen, SoundMap ™ and visible light image overlap, to help quickly find leak location.
-
Simple and intuitive interface allows technicians to identify leaks audio, to filter out background noise.
Vibration is雷竞技appFluke 810
-
In addition to wind turbine rotating equipment vibration test
-
Of common mechanical failure (bearing, loss, unbalanced, loosen) implementation onboard identification and localization, make the maintenance work focused on the fault source, reduce unplanned downtime
-
Through the overall vibration level, you can directly from the diagnosis of rapid assessment screen machine running status as a whole
Laser axis of the instrument雷竞技appFluke 830
-
Single laser measurement technology: means the reverse clearance error is reduced, thus achieve better data accuracy
-
Intuitive heuristic user interface: easy in a complete machine
-
A compass measurement mode: with a valid electronic gradienter realize flexible, reliable and repeatable measurements
Handheld oscillographic table雷竞技appFluke 190-204 - III
-
Without complicated Settings, automatic capture, see complex waveform analysis
-
IP51 protection grade, both durable and precision
-
As many as 4 road, up to 1000 v input independent segregation
.png)
Automatic pressure verification雷竞技appFluke 729 Pro
-
Automatically generate and control as much as 7 mpa pressure (70 bar, 1000 psi).
-
HART communication can achieve mA output adjustment, applications can be adjusted to the value of the HART to correct the zero pressure, pressure transmitter.
-
Quick replacement of lithium battery.
Pressure module雷竞技appFluke 750 p
-
Provide a 4-20 ma, 0 to 10 v signal, 24 v power supply, HART, troubleshooting, pressure transmitter calibration
Portable infrared temperature calibrator9132 & 9133
-
Compact structure, easy to carry, suitable for temperature calibration of infrared point (30 ° C to 500 ° C), is applied to the wind power industry.
-
57 mm (2.25 inch) of large black body target.
-
Used for RTD reference well contact temperature measurement.
.png)
On-line acoustic imagerSV600
-
High sensitivity to leak site
-
Open API is easy to integrate with existing systems
-
7 x24 continuous monitoring and avoid the omission of manual inspection
The infrared thermal imagerTiX580
-
640 x 480 pixel image quality excellence
-
LaserSharp autofocus function, and a few seconds to complete focus accurately
-
IR - Fusion patent technology, infrared optical Fusion, observe more test details
Multi-function calibrator more products5522 a / 5502 a / 5080 a
-
Cost-effective electrical calibration scheme, calibrated multimeter, clip-on table, power quality analyzer, such as application of light and wind power industry.
Thermal imagerThermoView TV40
-
All-round, all-weather continuous monitoring
-
More than one network to realize integration of management
-
Intelligent programmable software
High accuracy multi-channel thermometer1586 a
-
Cooperation fluke standard thermometer is used in the high precision of temperature sensor and sensor calibration, also can do the temperature distribution test, application of light and wind power industry.
Portable power quality analyzer雷竞技appFluke 1748
-
Measure all of the three-phase voltage and current and zero line current, three-phase and zero line voltage wires and four flexible current probe.
-
Comprehensive records: can automatically record all kinds of electric energy and electric energy quality variables, let you always grasp the trend of measurement.
-
Capture down, up and interrupt events: events waveform capture and RMS curve as well as the date and time stamp and severity information, to help find out potential root causes of power quality problems.
Large plane non-point source infrared calibrator4180 & 4181
-
Most large target 152 mm size can be calibrated infrared temperature measurement devices such as infrared thermal imager (500 ° C), the application of light and wind power industry.
Pressure validator雷竞技appFluke 754
-
Provide a 4-20 ma, 0 to 10 v signal, 24 v power supply, HART, troubleshooting, pressure transmitter calibration.
-
Measure the voltage and current (mA), RTD, thermocouple, frequency and resistance, to test the sensor, transmitter, and other instruments.
-
Output/analog voltage and current (mA), thermocouple, RTD, frequency, resistance and pressure calibration transmitter.
The battery internal resistance analyzerBT521
-
Battery internal resistance, which is the main measure of dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.
-
Measurement mode - battery automatically or manually sequences test, need not when every time need to save the measured value to press the button.
-
Comprehensive record - all measured values automatically capture in the testing process, and can look up on the instrument after download at any time for analysis.
Insulation resistance tester雷竞技appFluke 1555 kit
-
Test voltage up to 10 kv, suitable for all applications
-
Can be up to 2 t Ω resistance measurement
-
The CAT III 1000 V, the CAT 600 V safe level IV
Grounding resistance tester雷竞技appFluke 1625-2 KIT
-
Three pole and quadrupole potential drop pile (to use)
-
Quadrupole soil resistivity test pile (to use)
-
Selective test (using the pile and a jaw)
-
No pile test (using only two jaw)
Comprehensive safety tester1664
-
Automatic testing function can test line/loop impedance, RCD tripping current/tripping time, through a single connection and click on the button for insulation test.
-
With large current loop mode.And compared in the trip mode RCD circuit test, measurement speed is faster.
-
Unique zero adapter to facilitate fast, is reliable and accurate test wire and power compensation.
Holding a three-phase power meter1738
-
Automatically capture and record the voltage, current, power, harmonic and the associated power quality, value, and use the incident wave snapshots and high resolution true RMS configuration file capture sag, transient and surge current
-
Instrument power supply convenient: directly from a measuring instrument circuit for power supply
-
Through our automated reporting functions download and analyze the energy consumption and power quality of the health of every detail, and using the integrated power quality health to quickly understand the health status of the system
Ma clip-on table雷竞技appFluke 773
-
Without "disconnect circuit can measure 4 to 20 mA signal
-
0.01 mA sensitivity and resolution
-
Measurement of PLC and analog I/O mA signal control system
-
It can display mA measured value and the percentage of 4 to 20 mA range double backlit display
Vibration check meter雷竞技appFluke 805
-
Innovative sensor design, can be caused by tilted or by force measurement deviation degree.
-
Regardless of the frequency of high and low, all can provide high quality measurement data
-
In level 4 calibration frequency vibration and bearing condition severity of the problem
Bureau of ultrasonic imaging雷竞技appFluke ii910
-
Quickly and easily perform partial discharge detection and partial discharge test
-
By finding and fixing partial discharge problem to reduce the daily cost and save energy
-
PDQ model of partial discharge is used to capture and analysis
Cable line detectorsUAT - 620.
-
A variety of detection model can be used in various applications positioning and tracking of the neutral and live wire or pipe
-
Simple and intuitive transmitter according to the attachment of the connected automatically select the correct positioning function, and can be custom 8 KHz or 33 KHz test frequency
-
Receiver is equipped with high contrast display, can be in the bright sunlight clear view, and have the function of automatic backlighting, suitable for dark environment
.png)
Copper authentication analyzerCH DSX2-5000
-
Ten seconds of the Cat 6 a test of time
-
Graphically show the source of the problem in time
-
Supports all standard
-
Using LinkWare ™ management software to create a professional test report
LT handheld infrared thermometer3 I Smart
-
- 30 ° C to 1300 ° C broad temperature range wide application range.
-
125:1 distance coefficient ratio can provide a smaller spot size to measure smaller goals.
-
Provide field personnel safety distance measurement.
-
Infrared thermometer and the joining together of thermocouple thermometer table 2.
-
The attached K type thermocouple type probe to facilitate rapid temperature calibration on site.
.png)
.png)
Handheld infrared thermometerRaynger ® 3 I Plus
-
Temperature range: 700-3000 DHS C (1292-5432 DHS F) from 400 to 2000 DHS C (752-3632 DHS F).
-
Distance coefficient ratio (D: S) : 250-1.
-
Working environment temperature: 0 to 50 DHS C (32 to 120 DHS F).
-
The double laser targeting options and a sight.
-
Inside the red dot target technology, accurate alignment "hot" background.
.png)
The temperature of the solar tracking systemSolarPaq ®
-
Obtain accurate repeatable results for process optimization.
-
To save time and money to set or adjust the oven.
-
Quick, easy process performance monitoring on a regular basis.
-
To improve battery efficiency and productivity, and does not affect production.
-
Can report exact process condition in actual production process.
.png)
Optical fiber certification test instrumentCertiFiber ® Pro
-
Fiber loss test suite certification a very short time
-
In accordance with ANSI/TIA and ISO/IEC ring flux compliance requirements
-
To ensure that all work correctly and efficiently complete the fiber loss test suite certification a very short time
-
In accordance with ANSI/TIA and ISO/IEC ring flux compliance requirements
Authentication level fiber testerOptiFiber ® Pro OTDR
-
Automatically set the fiber characteristics can be detected and setting up the measurement parameters
-
Manual expert mode support for simple adjustment automatically set
-
Can automatically identify the connector, weld joints, bending, and the beam splitter
Rugged multimeterHD160C
-
High voltage capability, measuring up to dc 1500 v and 1000 v ac voltage
-
The CAT 1000 v safe level IV
-
Special seal environment resistance, water resistance.IP67 degree of protection
Leakage current clamp table microampere level369 FC/CN
-
True RMS measurement ensures complex, non sinusoidal waveform measurement accuracy
-
61 mm clamps
-
The highest resolution of 1 mu A, minimum range as low as 3 ma (the maximum measured current for 60 A)
Clip-on table319
-
Unique 40 A small range, high accuracy of current test, A high-resolution, 0.01 1.6% and high precision measurement
-
Tong head thin, light body, easier to use in confined Spaces
-
Can be measured, such as motor starting current and lighting equipment
Insulation resistance tester1535
-
Test voltage up to 2500 v, 500 g Ω test range
-
Automatic polarization index (PI)/dielectric absorption ratio (DAR)
-
Automatic discharge, which can guarantee the security
-
All Chinese operating interface, designed for Chinese users
Insulation resistance tester1508
-
The insulation of the 0.01 M Ω to 10 G Ω test
-
Insulation test voltage: 50 V, 100 V, 250 V, 500 V and 1000 V, suitable for a variety of applications
-
Electric circuit detection function, if a greater than 30 V voltage is detected, which prohibit testing, improve the ability of the protection of personnel
Key asset monitoring solutionPan and Tilt
-
360 horizontal rotation and 130 ° pitch adjusting
-
Carry dual optical system of infrared and visible light
-
Fully automatic intelligent inspection mode
.png)
Modular air pressure controller6270 a
-
Range: vacuum to 20 mpa
-
The accuracy of pressure control: 0.001% range
-
Measurement uncertainty: 0.01% reading
-
Control module and measuring module are independent of each other, easy to maintain
-
Pollution prevention options to ensure the calibrator valves clean and is not affected by impurities
Ac/dc charging pile (machine) on-site verification device6648 a, 6658 a
-
Voltage current measurement accuracy is 0.02 on the Richter scale are unlikely
-
Interoperability, communication protocol conformance and metrological verification functions in one
-
Can use a PC or mobile APP operating equipment
-
Compact and light easy to carry
thermometer62 Max
-
Dustproof and waterproof: IP54 dustproof and waterproof
-
Durable: after 3 m drop test
-
In line with the ergonomics design: completely redesigned, with a more natural and comfortable
.png)
Environmental temperature and humidity test971
-
Temperature range: - 20 ° to 60 ° C - C (4 ° F to 140 ° F)
-
Relative humidity: 5% to 95%
-
Measurement of dew point and the wet bulb temperature
-
99 records storage capacity
.png)
Thermal anemometer923
-
Wireless sensor and the table body separation design, 30 m can furthest distance sensor, no longer bound by the fetters of cable and
-
Wind speed measurement range: 0.2 m/s - 20 m/s, resolution of 0.01 m/s
-
To measure wind speed, air volume, temperature, and support setting of atmospheric pressure
Illuminance meter941
-
Unit of measure in LUX (LUX) and switch between the foot candle (FC)
-
A small, easy to carry
-
Optional automatic or manual range
tachometer931
-
Contact type and non-contact measurement mode switching
-
Different speed measuring head and speed to adapt to the different measurement occasions
-
A small, easy to hold
multimeter289
-
Trend record and report output
-
The 20000 - word reading
-
0.025% accuracy
-
Small signal test
Insulated hand tools covered 8 timesIKST7
-
3 a screwdriver, 2 put a cross head screwdriver, pliers, oblique nose pliers, wire cutter volume type tool bag
-
By chromium molybdenum vanadium steel (CMV)
-
Made in Germany, the German VDE certification
Industrial endoscope雷竞技appFluke DS703FC
recorderDP5
High precision thermometerEndurance series
Eight and a half desktop DMMS8558 a / 8588 a
On-line infrared thermometerMI3
The rf power analyzerNorma 6000 series
A power quality analyzer雷竞技appFluke 1777
1500 v clip-on table雷竞技appFluke 393 FC
The infrared thermal imager雷竞技appFluke TiS75 +
Color digital oscillographic table雷竞技appFluke 190-202 - III
The infrared thermal imagerTi480 PRO
Sunlight irradiance meter雷竞技appFluke IRR1 SOL
Acoustic imager雷竞技appFluke ii900
Vibration is雷竞技appFluke 810
Laser axis of the instrument雷竞技appFluke 830
.png)
Handheld oscillographic table雷竞技appFluke 190-204 - III
Automatic pressure verification雷竞技appFluke 729 Pro
Pressure module雷竞技appFluke 750 p
Portable infrared temperature calibrator9132 & 9133
On-line acoustic imagerSV600
The infrared thermal imagerTiX580
Multi-function calibrator more products5522 a / 5502 a / 5080 a
Thermal imagerThermoView TV40
High accuracy multi-channel thermometer1586 a
Portable power quality analyzer雷竞技appFluke 1748
Large plane non-point source infrared calibrator4180 & 4181
Pressure validator雷竞技appFluke 754
The battery internal resistance analyzerBT521
Insulation resistance tester雷竞技appFluke 1555 kit
Grounding resistance tester雷竞技appFluke 1625-2 KIT
Comprehensive safety tester1664
Holding a three-phase power meter1738
Ma clip-on table雷竞技appFluke 773
Vibration check meter雷竞技appFluke 805
Bureau of ultrasonic imaging雷竞技appFluke ii910
.png)
Cable line detectorsUAT - 620.
Copper authentication analyzerCH DSX2-5000
LT handheld infrared thermometer3 I Smart
Handheld infrared thermometerRaynger ® 3 I Plus
The temperature of the solar tracking systemSolarPaq ®
Optical fiber certification test instrumentCertiFiber ® Pro
Authentication level fiber testerOptiFiber ® Pro OTDR
Rugged multimeterHD160C
Leakage current clamp table microampere level369 FC/CN
Clip-on table319
Insulation resistance tester1535
Insulation resistance tester1508
Key asset monitoring solutionPan and Tilt
Modular air pressure controller6270 a
.png)
Ac/dc charging pile (machine) on-site verification device6648 a, 6658 a
thermometer62 Max
Environmental temperature and humidity test971
Thermal anemometer923
Illuminance meter941
tachometer931
multimeter289
Insulated hand tools covered 8 timesIKST7
How to seize the new energy industry certainty opportunities?
Immediately for solution
"Carbon peak", "carbon neutral" as an indicator of the domestic new energy industry, led solar, wind, water and electricity demand such as optimism, demand is rising year by year, the long-term outlook.
Fluke focus on new energy industry, not only for new energy upstream precision core material preparation, provide precise process control technology, at the same time in the field of power plant operation maintenance and testing have professional knowledge and technology, to participate in the micro grid, energy storage, such as cutting-edge scientific research projects, provide targeted solutions, with a comprehensive product portfolio of new energy services to our clients and prolong the service life of the power of new energy power station, power generation efficiency.
Immediately as a free download
Free download "fluke application of new energy industry handbook"
Check the represents you have read, understand and agree with flukeThe privacy policy/statement
Click on the submit
The message cannot be empty
All copyright © 1995-2022 fluke company | fluke 400-810-3435 | customer service centers in ChinaPrivacy policy| Shanghai ICP for 11037028-20
