雷竞技appFluke PQ400 Electrical Measurement Window

Use雷竞技app Fluke PQ400 Electrical Measurement Window phase measuring equipment can be connected to electric panel, without having to open the panel door or wearing auxiliary personal protective equipment (PPE)¹.

Strictly comply with quality standards, in line with the specified requirements.Careful design, to ensure safety.

雷竞技appFluke PQ400 gives you the key to obtain the required power quality and electric energy data, and can also reduce the test time and help ensure security.

• Reduce arc flash and get an electric shock risk, increasing the safety of the staff at the same time
• Don't need to open the panel door can key power quality and electric energy measurement, it can reduce maintenance costs and reduce down time, and can make in does not affect the operation of the case at any time record and monitoring
• By reducing measure on the open panel of the associated risk to reduce the work permit requirements and processes, thereby saving time and energy
• Improve the efficiency of measurement, do not need to wear the arc flash of personal protective equipment¹, save time, improve efficiency, increase operating comfort

features

• Permanent connection type in the voltage and current sensors located on the panel, it allows you to don't open the panel door under the condition of using external access to power quality and electric energy measurement, so as to reduce the operation risk
• Three-phase voltage, neutral and ground wire connection covers most of the measurement of voltage and current situation
• Have i雷竞技apps suitable for the Fluke 1740 and 1730 series power quality and power energy automatic probe detection functions of the recorder and compliant gripper, let you don't need to open the electrical cabinet to check the clamp type
• 360 degrees full to rotate enables PQ400 window to any direction
• Use the step drill and electric hydraulic punching machine (114.3 mm, 4.5 in diameter) for installation, simple
• The CAT IV, 600 v and 1000 v rated CATIII security levels (30 standard) on the basis of IEC61010-2 -
• Compatible with standard 4 mm shielding type safety socket voltage test conductor, voltage connect more easily;To lower risk of accidental contact charged electric components, a higher security;Reduces the buying need special voltage wires

The working principle of

雷竞技appFluke PQ400 Electrical Measurement Window is a permanent installation interface, can let the technical personnel almost instantly connect Electrical panel for key power quality and electric energy Measurement.PQ400 installation using a standard step drill and electric hydraulic punching machine (114.3 mm, 4.5 in hole diameter), allows the user to cover most measurement configuration of three-phase voltage, current and grounding connection.After installation, users only need to open the window cover, open the lid, you can connect the recorder or analyzer voltage wires.Connected to the current sensor conductor, then start to key measures.measurement完成后，只需从前面板接口上拆下电压和电流连接，然后锁上窗盖，将内部连接保留在原位以备将来使用。

¹Comply with local and national safety codes.Wear personal protective equipment (approved rubber gloves, protective masks and flame retardant clothing, etc.), in case of being shocked when exposed dangerous electric conductor and electric arc and hurt.