雷竞技appFluke Networks MicroScanner ™ PoE industrial Ethernet cable testing instrument suite
The main features
- For industrial Ethernet network (including the Ethernet/IP, Profinet, based on the EtherCAT system) perform test leads
- According to cable length, wiring diagram and fault distance
- Show up to 10 g network switch speed and PoE power supply
- Using IntelliTone (TM) and Remote ID suite positioning and tracking cable
- PoE report level (0 to 8)
Produc雷竞技appts overview: Fluke Networks MicroScanner ™ PoE industrial Ethernet cable testing instrument suite
雷竞技appFluke Networks MicroScanner ™ PoE industrial Ethernet cable testing instrument is available in a few seconds to RJ45, M12X, M12D and M8D termination cable performs on-off testing, and graphically display the results, so that you can see the open circuit, short circuit and crossover cable.
MS - POE also can quickly determine the problem is caused by insufficient power supply or by the electric equipment.Cables and power failures can lead to costly production downtime, so quick to determine the location of the cable damage for replacement or repair is very important.
Including IntelliTone Pro 200 probe, Remote ID suite, handbag, double entry, Cat6A jumper, RJ45 connector adapter male head turn RJ45 female head jump line, RJ45 / M12X jumper, RJ45 / M12D jumper, RJ45 / M8D jumper (for testing M12X), M12D, M8D termination cable.
Produc雷竞技appt specifications: Fluke Networks MicroScanner ™ PoE industrial Ethernet cable testing instrument suite
The following technical specifications on 23 ° C (73 ° F) when applicable, unless otherwise specified.
| Environmental parameters | |
| Working temperature | 32 ° F to 113 ° F (0 °, 45 ° C - C) |
| Storage temperature | - 4 ° F - + 140 ° F (20 ° C - + 60 ° C) |
| Relative humidity (RH %, no condensation) | 90% (50 ° F to 95 ° F 10 ° C - 35 ° C) 75% (95 ° F to 113 ° F 35 ° C - 45 ° C) |
| Shock and vibration | Random, 2 g, 5 Hz - 500 Hz (level 2) 1 m drop test, with or without wiring diagram adapter |
| security | IEC 61010-1 version 3 |
| At an altitude of | 4000 m;Storage: 12000 m |
| EMC | IEC 61326-1 |
| General technical indicators | |
| The test joints | 8 needles shielded modular jack, can splice modular (RJ45) and 4 8 needle modular RJ11 plugs. |
| The power supply | Battery type: 2 AA (NEDA 15 a, IEC LR6) alkaline batteries Battery life: 20 hours (normal use) Compatible with other cell types: 2 AA lithium battery, nickel metal hydride camera battery, nickel battery |
| Size and weight (with batteries and connecting wiring diagram adapter) | 3 in x 6.4 in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm) MicroScanner ™ PoE: 10.6 oz (300 g) |
| display | Monochrome backlit LCD screen |
| Test mode | |
| Test leads | Measuring length, validation, wiring diagram, identify Remote ID locator and test Ethernet port.When the resistance of the cable more than 12.5 Ω MicroScanner ™ PoE also shows HIGH Ω.Display the results in a single screen. |
| audio | Generate IntelliTone ™ and conventional analog audio signal |
| PoE | MicroScanner ™ PoE: request and detect whether there is compatible with 802.3 af, ats, bt and UPOE PoE equipment (Cisco general Ethernet power supply) |
| Performance indicators | |
| Testing cable type | Twisted pair UTP, FTP, SSTP |
| The length of the test | Measuring range: 460 m (1500 ft) Resolution: 0.3 m (1 ft) Typical accuracy: + / - 4%, or 0.6 m (2 ft), of greater value.Belongs to the extra error NVP uncertainty. Calibration: the user can set the twisted-pair NVP values.Can use a known length of cable to determine the actual values of NVP. |
| The wiring diagram test | Single wire fault detection, short circuit, misconnection, take out stitches points to, and up to seven remote adapter ID.Drawn in proportion to the length of the wiring diagram to visually indicates the rough position of the fault. |
| Ethernet port detection | MicroScanner ™ PoE: to test 802.3 Ethernet port of nominal rate, suitable for 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps and 10 Gbps rate. |
| Audio generator | Supp雷竞技apport with Fluke Networks digital IntelliTone ™ probes produce audio and draw the cable wiring diagram.Can produce four audio compatible with standard analog probe.SmartTone ™ function can be used in IntelliTone or analog sensor reliably identify the cable wire harness. |
Mode雷竞技appl: Fluke Networks MicroScanner ™ PoE industrial Ethernet cable testing instrument suite
MS - POE - IE - KIT cable testing instrument
The attached:
- Equipped with IntelliTone Pro 200 probe MicroScanner ™ PoE industrial Ethernet professional suite
- Remote ID suite
- handbag
- Compound connector adapters
- Cat6A jumper
- RJ45 male head turn RJ45 female head jump line
- RJ45 / M12X jumper
- RJ45 / M12D jumper
- Used for testing the RJ45 / M8D M12X jump line
- M12D
- M8D termination cable
