雷竞技appFluke Networks MicroScanner ™ 2 industrial Ethernet cable testing instrument
The main features
- A graphical diagram, cable length, cable ID and fault distance
- Can test RJ11, RJ45, coaxial cable and industrial Ethernet connector type
- Using IntelliTone ™ digital and analog audio technology to locate the cable
- Validation of 10/100/1000 Ethernet and detection of PoE power supply
- Backlit LCD screen is suitable for various working environment
Produc雷竞技appts overview: Fluke Networks MicroScanner ™ 2 industrial Ethernet cable testing instrument
雷竞技appFluke Networks MicroScanner ™ 2 industrial Ethernet cable testing instrument is available in a few seconds to RJ45, M12X, M12D and M8D termination cable performs on-off testing, and graphically display the results, so that you can see the open circuit, short circuit and crossover cable.
It can also report which one end of the cable has a problem, and report to breaking point of cable inside the distance.Cable fault can lead to costly production downtime, so quickly locate the cable damage for replacement or repair is very important.
Including handbag, double entry, Cat6A jumper, RJ45 connector adapter male head turn RJ45 female head jump line, RJ45 / M12X jumper, RJ45 / M12D jumper, RJ45 / M8D jump line (used in testing M12X), M12D, M8D termination cable.
Produc雷竞技appt specifications: Fluke Networks MicroScanner ™ 2 industrial Ethernet cable testing instrument
The following technical specifications on 23 ° C (73 ° F) when applicable, unless otherwise specified.
| Environmental parameters | |
| Working temperature | 32 ° F to 113 ° F (0 °, 45 ° C - C) |
| Storage temperature | - 4 ° F - + 140 ° F (20 ° C - + 60 ° C) |
| Relative humidity (RH %, no condensation) | 90% (50 ° F to 95 ° F 10 ° C - 35 ° C) 75% (95 ° F to 113 ° F 35 ° C - 45 ° C) |
| Shock and vibration | Random, 2 g, 5 Hz - 500 Hz (level 2) 1 m drop test, with or without wiring diagram adapter |
| security | IEC 61010-1 version 3 |
| At an altitude of | 4000 m;Storage: 12000 m |
| EMC | IEC 61326-1 |
| General technical indicators | |
| The test joints | 8 needles shielded modular jack, can splice modular (RJ45) and 4 8 needle modular RJ11 plugs.MicroScanner2: used to test the coaxial cable of the F connector. |
| The power supply | Battery type: 2 AA (NEDA 15 a, IEC LR6) alkaline batteries Battery life: 20 hours (normal use) Compatible with other cell types: 2 AA lithium battery, nickel metal hydride camera battery, nickel battery |
| Size and weight (with batteries and connecting wiring diagram adapter) | 3 in x 6.4 in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm) MicroScanner2: 10.6 oz (300 g) |
| display | Monochrome backlit LCD screen |
| Test mode | |
| Test leads | Measuring length, validation, wiring diagram, identify Remote ID locator and test Ethernet port.Display the results in a single screen. |
| audio | Generate IntelliTone ™ and conventional analog audio signal |
| PoE | MicroScanner2: request and compatible with 802.3 af PoE (power supply) Ethernet devices |
| Performance indicators | |
| Testing cable type | Twisted pair UTP, FTP, SSTP Coaxial cable (MicroScanner2) : Ω 75 Ω, 50 Ω, 93 |
| The length of the test | Measuring range: 460 m (1500 ft) Resolution: 0.3 m (1 ft) Typical accuracy: + / - 4%, or 0.6 m (2 ft), of greater value.Belongs to the extra error NVP uncertainty. Calibration: the user can set the twisted pair or coaxial cable of NVP value (MicroScanner2).Can use a known length of cable to determine the actual values of NVP. |
| The wiring diagram test | Single wire fault detection, short circuit, misconnection, take out stitches points to, and up to seven remote adapter ID.Drawn in proportion to the length of the wiring diagram to visually indicates the rough position of the fault. |
| Ethernet port detection | MicroScanner2: to test 802.3 Ethernet port of nominal rate, suitable for 10 Mbps, 100 Mbps and 1 Gbps rate. |
| Audio generator | Supp雷竞技apport with Fluke Networks digital IntelliTone ™ probes produce audio and draw the cable wiring diagram.Can produce four audio compatible with standard analog probe.SmartTone ™ function can be used in IntelliTone or analog sensor reliably identify the cable wire harness. |
Mode雷竞技appl: Fluke Networks MicroScanner ™ 2 industrial Ethernet cable testing instrument
MS2-100 - IE cable testing instrument
The attached:
- MicroScanner ™ 2 industrial Ethernet basic suite, with a handbag
- Compound connector adapters
- Cat6A jumper
- RJ45 male head turn RJ45 female head jump line
- RJ45 / M12X jumper
- RJ45 / M12D jumper
- Used for testing the RJ45 / M8D M12X jump line
- M12D
- M8D termination cable
