雷竞技appFluke 719 portable automatic pressure check

The main features

Main features:

Portable pressure checking instrument, the use of electric pump, one hand can complete pressure calibration
The pressure measurement uncertainty, while only 0.025%
MA level signal measurement and the accuracy of signal source is as high as 0.015%
High precision pressure adjustment cursor
Deflated speed adjustable vent valve for pressure regulation
Stress is checking instrument used for high precision transducer calibration of ideal performance
207 kpa (30 PSI) and 689 kpa pressure range (100 PSI)
The pump of programmable limit Settings:
- To prevent stress
- Users can target of pumping pressure for programming
Pressure verification by any one of 29 700 PXX pressure module module to extend the pressure range
At the same time of pressure measurement source mA, to test the valve and the I/P transducer
Simulation mA signal, with 4-20 mA loop for troubleshooting
Through the built-in switch testing capabilities, to test the pressure switch
Used in the process of measuring the 24 v power supply for the transmitter power supply loop
Equipped with a clean mouth, and reduces the chance of pump failure

Produc雷竞技appts overview: Fluke 719 portable automatic pressure check

雷竞技appFluke 719 portable automatic pressure check, make you forget the use of hand pump

雷竞技appFluke 719 portable automatic pressure checking instrument using new built-in electric pump, pressure calibration became so easy!You can now use single hand operation, easy and fast to complete the calibration and testing of pressure equipment, save valuable time.

Adopting programmable pump threshold Settings to avoid excessive pressure, can be set up "on value.Unique clean mouth design, reduces the risk of pump failure, easier to clean, do not need to repair.

Pressure calibration is very convenient, and through the fluke brands you know and trust, can meet the needs of the all process of calibration.

View: total pressure calibration solution, all the problem solved

Produc雷竞技appt specifications: Fluke 719 portable automatic pressure check

General technical specifications
Storage temperature	- 30 ° to 60 ° C C
Working temperature	- 10 ° C to 55 ° C
Relative humidity	95% (10 ° to 30 ° C - C)
	75% (30 ° C to 40 ° C)
	45% (40 ° C to 50 ° C)
	35% (50 ° C to 55 ° C)
impact	1 m drop test
Security level	CAN/CSA C22.2 No. 1010.1, 1992
Electromagnetic compatibility (EMC)	EN50082-92 and took EN55022:1994 Class B
Size (height x width x length)	60 x 87 x 210 mm
	(2.19 x 3.41 x 8.28 in)
The weight of the	912 g (2 lb)
The battery	Two 9 V alkaline battery
Battery life	12 hours (12 mA into 500 Ω load), and 200 times 100 psi can pump circulation, 30 psi pump cycle can be carried out 500 times
Warranty period	Pressure checking instrument for three years, air pump for one year
Technical specifications
雷竞技appFluke 30 g - 719	range	- 12 to 36 psi - 850 mbar to 2.4 bar
	The resolution of the	0.001 psi, 0.1 mbar
	precision	0.025% of the range, 6 months 0.035% of the range, 1 year
雷竞技appFluke - 719-100 g	range	- 12 to 120 psi, bar - 850 mbar and $8
	The resolution of the	0.01 psi, 1 mbar
	precision	0.025% of the range, 6 months 0.035% of the range, 1 year
mA	range	0 to 24 mA
	The resolution of the	0.001 mA
	precision	Reading of 0.015% + 2 count
	Maximum load 1000 Ω, HART mode for 750 Ω ohm
Circuit power supply	range	24 V dc
	The resolution of the	N/A
	precision	Plus or minus 10%
Pump parameters
Peak pressure	Type 120 PSI (8 BAR) (100 PSI)
pumping	Creates - 30 psi less than 15 seconds
	Less than 45 seconds creates - 100 psi
	1. Take 1 m 1/8 in test tube
Pump cycles between two repair	5000
The general pump life	20000 times the calibration cycle