I30 AC/DC current clamp table

The main features

Current clamp using hall effect technology, can measure the dc and ac current
Contains the banana plugs, compatible with multimeter
Current range: 30 mA - 30 A dc, 30 mA - 20 A ac RMS
Frequency range: dc to 20 kHz (0.5 dB)
The CAT III 300 V safety rating

Products overview: i30 AC/DC current clamp table

I30 current clamp table based on the working principle of hall effect technology, suitable for measuring the dc and ac current.I30 can with multimeter, recorder, and other appropriate recording instrument, and thus for the accurate noninvasive current measurements.

Product specifications: i30 AC/DC current clamp table

Electrical technical indicators
Specify the current range	30 mA - 30 A dc, 30 mA - 20 A ac RMS
Current range available	5 30 mA mA - 30 A dc, ac RMS - 20 A
Crest factor	1.4 in
The output sensitivity	100 mV/A
Precision (+ 25 ° C)	Dc, reading plus or minus 1%, plus or minus 2 mA Communication, reading plus or minus 0.5 dB, plus or minus 2 mA
The resolution of the	Plus or minus 1 mA
The load impedance	> 10 k Ohm and pf 100 or less
Wire position sensitivity	Centered relative reading plus or minus 1%
Frequency range	Dc to 20 kHz (0.5 dB)
The temperature coefficient of	Readings of plus or minus 0.01% / ° C
The power supply	9 V alkaline battery, MN1604 / PP3, 30 hours, low battery indicator
Working voltage college (see section "safety standard")	300 V ac RMS or dc
General technical indicators
The largest wire size can be obtained	19 mm diameter
Output connection	4 mm secure connector
Output zero	Obtained by manual regulation refers to the wheel
The length of the cable	1.5 m
Working temperature range	0 ° C to + 50 ° C
Storage temperature range (battery out)	- 20 ° C to + 85 ° C
Working humidity	From 15% to 85% (without condensate)
The weight of the	250 g
security	IEC 61010-1, pollution level 2
	IEC 61010-2-032: the CAT III 300 v
	In the absence of insulated conductor is to use the probe shall not exceed 300 V dc, ac RMS or below 1 kHz and frequency.
EMC compatibility	IEC 61326-1: portable device of electromagnetic environment