China

725 ex this Ann type multi-function process verification

  • 725 ex this Ann type multi-function process verification
  • 725 ex this Ann type multi-function process verification

The main features

Measurement and output functions were used to test and calibration almost all process parameters.雷竞技appFluke 725 ex this Ann model verification is a powerful multi-functional calibration solution:

  • I.S. in Class I, Division 1 Groups B - D, 171 ° C requirements
  • To measure dc voltage, ma, RTD, thermocouple, frequency and ohms
  • Output or analog dc voltage, ma, RTD, thermocouple, frequency and ohms
  • Dual channel source and measuring ability for transducer calibration
  • Power transducer, including internal loop power supply
  • Store commonly used test set, easy to use in the future
  • Measuring pressure of 3000 psi / 2雷竞技app00 bar, the eight type in the Fluke 700 pex pressure module, one of the calibration and the I/P pressure transmitter equipment
  • Pressure switch testing capabilities, capture set and reset and dead zone
  • Small and light
  • A simple push button the user interface
  • Strong and durable, reliable and suitable for field use

Optional 700 pex pressure module for ATEX certification Ex II 1 G Ex ia IIC T4.According to the NEC - 500 by the CSA i. Class 1, Division 1 areas Group A - D certification.

Enquiry and booking demos

Products overview: 725 ex this Ann type multi-function process verification

Simple and powerful this Ann model calibration tool

New 725 ex this Ann type multi-function process verification powerful and easy to use.Coop雷竞技apperate with new Fluke - 700 pex pressure module (8), one of the 725 ex can adjust all the existence of explosive gas area using the need to maintain the process equipment.

Measurement and the source of ma (RTD and thermocouple), voltage, temperature and frequency, ohm, and pressure, working pressure module options.

Do you need the calibration transmitter?725 ex separately display allows you to view the input and output values at the same time.And I/P test for valve, you can at the same time of measuring pressure source to ma.725 ex with functions of automatic slope and step by step, can be used in remote testing, and 25% step by step, can be used for rapid linear test.

雷竞技appFluke 725 ex would take the box.Control is simple, no menu, easy to operate.Its memory function can quickly set up.Its strong design so you can follow one's inclinations.

View: total pressure calibration solution, all the problem solved

Product specification: 725 ex this Ann type multi-function process verification

Measurement accuracy
Dc voltage 30.000 V 0.02% + 2 word (upper display)
10.000 V 0.02% + 2 word (the lower display)
90.00 mV 0.02% + 2 words
10.00 mV to 75.00 mV 0.025% + 1 count (through TC connector)
Dc current 24.000 mA 0.02% + 2 words
resistance 0.0 to 400.0 Ω 0.15 Ω Ω 0.1 (4), (line 2 and line 3)
Ω 401 to 1500 0.5 Ω line (4), 1 Ω (line 2 and line 3)
Ω 1500 to 3200 1.5 Ω Ω 1 (4), (line 2 and line 3)
frequency 2.0 to 1000.0 CPM 0.05% + 1 word
1.0 to 1100.0 Hz 0.05% + 1 word
1.00 to 10.00 kHz 0.05% + 1 word
The sensitivity Fengfeng lowest value 1 V
pressure Using eight when any of the Ann type pressure module accuracy of 0.025% of the range (for detailed specifications, please refer to the options and accessories of pressure module).Provide the following modules: differential pressure, pressure gauge, vacuum degree, absolute pressure, double pressure and high pressure.
The output precision
Dc voltage 100.00 mV 0.02% + 2 words
10.000 V 0.02% + 2 words
10.00 mV to 75.00 mV 0.025% + 1 count (through TC connector)
Dc current 24.000 mA (output) 0.02% + 2 words
24.000 mA (simulation) 0.02% + 2 words
resistance 15.0 to 400.0 Ω 0.15 Ω (0.15 to 0.5 mA) excitation current, 0.1 Ω (0.5 to 2 mA exciting current)
Ω 401 to 1500 0.5 Ω (exciting current 0.05 to 0.8 mA)
Ω 1500 to 3200 1 Ω (exciting current 0.05 to 0.4 mA)
frequency 2.0 to 1000.0 CPM 0.05%
1.0 to 1100.0 Hz 0.05%
1.00 to 10.00 kHz 0.25%
waveform 5 V p - p square wave, 0.1 V
RTD and thermocouple
Accuracy of measurement NI - 120. 0.2 ° c.
PT - 100 (385). 0.33 ° c.
PT - 100 (393). 0.3 ° c.
PT - 100 (JIS) 0.3 ° c.
PT - 200 (385). 0.2 ° c.
PT - 500 (385). 0.3 ° c.
PT - 1000 (385). 0.2 ° c.
The resolution of the 0.1 ° c.
J 0.7 ° c.
K. 0.8 ° c.
T 0.8 ° c.
E 0.7 ° c.
R 1.8 ° c.
s. 1.5 ° c.
B 1.4 ° c.
L 0.7 ° c.
U 0.75 ° c.
N 0.9 ° c.
The resolution of the J, K, T, E, L, N, U: 0.1 ° C, 0.1 ° F, R, S, B: 1 ° C, 1 ° F
XK 0.6 ° c.
BP 1.2 ° c.
The output precision NI - 120. 0.2 ° c.
PT - 100 (385). 0.33 ° c.
PT - 100 (393). 0.3 ° c.
PT - 100 (JIS) 0.3 ° c.
PT - 200 (385). 0.2 ° c.
PT - 500 (385). 0.3 ° c.
PT - 1000 (385). 0.2 ° c.
The resolution of the 0.1 ° c.
Measurement accuracy for 4 line.
J 0.7 ° c.
K. 0.8 ° c.
T 0.8 ° c.
E 0.7 ° c.
R 1.4 ° c.
s. 1.5 ° c.
B 1.4 ° c.
L 0.7 ° c.
U 0.75 ° c.
N 0.9 ° c.
The resolution of the J, K, T, E, L, N, U: 0.1 ° C, B, R, S, 1 ° C
XK 0.6 ° c.
BP 1.2 ° c.
Technical specifications
Function of the slope Output function Voltage, current, resistance, frequency, temperature
The slope Slow linear slope, fast linear slope, 25% step slope
Circuit power supply function voltage The 12 V
The accuracy of 10%
Maximum current 22 mA, short circuit protection
Step function Output function Voltage, current, resistance, frequency, temperature
Step by step The range of 25%, 100%
Safety specifications
approval I.S. grade I class B - 1 D group
The mechanical and general specifications
size 130 x 236 x 61 mm (5.188 x 9.291 x 2.402 in)
The weight of the 0.85 kg (1.874 LBS.)
The battery 4 AA alkaline batteries
Warranty period Three years,
Replace the battery Separate the battery compartment, without breaking the calibration seal operation
Port side Pressure module connector

Model: 725 ex this Ann type multi-function process verification

725 ex this Ann type multi-function process verification

725 ex this Ann type multi-function process verification

Multi-function process calibrator include:

  • A set of AC72 alligator clip
  • A set of extensible test line
  • A set of TL 75 test line
  • The user manual
  • Calibration can be traced back to the NIST report and data