China

雷竞技appFluke T6-1000 PRO non-contact current voltage tester

  • 雷竞技appFluke T6-1000 PRO with the included grounding clip, holster
  • FieldSense ™ technology shows both voltage and current through the open fork
  • Visual continuity shows a bright green display, helpful in noisy work areas
  • 120 was Wide fork allows testing of wires

The main features

  • At the same time to check the voltage and current measurements, thus to save time
  • Visual Continuity ™ - automatic green screen for on-off check, the sound is too big to hear the buzzer rang cases, very useful
  • Without contact charged voltage, FieldSense ™ technology, measure the ac voltage, current and frequency

Produc雷竞技appts overview: Fluke T6-1000 PRO non-contact current voltage tester

In the same screen voltage and current

T6-1000 PRO non-contact current voltage tester can measure up to 1000 V ac voltage alternating current and up to 200 A, measured through the fork, don't need to test lead into the charged body.Use the attached big load alligator clip will be black lead to ground wires into the jaw, then check the voltage and current at the same time.Applicable to the highest specifications for AWG 4/0 (120 mm2Wire), ac current and voltage being measured up to 200 A and 1000 V respectively.Even when wearing gloves can also be used.This will change the way you work.

The keyboard

  • Display voltage and current at the same time, the motor and pump or other equipment troubleshooting, at the same time to check the voltage and current measurements, so as to save time
  • Visual Continuity ™ - if check on and off, in the buzzer rang when the screen will automatically turn green.This function in those with too loud to hear the buzzer rang, wear ear protector or because the light was too dim to see screen under the condition of very useful.Visual Continuity makes on and off the result of a sexual check and reliable.
  • True RMS - precise voltage and current measurements, even in measuring the complex signal.
  • Without contact charged body, FieldSense ™ technology, measure the ac voltage, current and frequency

Other capabilities

  • 1 to 1000 V ac or dc
  • 0.1 to 200 A
  • Resistance: 1 Ω Ω to 100 k
  • 45 Hz - 66 Hz frequency range (measured by fork)
  • Most applicable to the highest specifications for 4/0 AWG wires (17.8 mm / 0.7 "jaw opening)
  • HOLD button (keep) to a temporary freeze on the screen reading, easy to see
  • Backlit display, easy reading
  • Can choose fluke TPAK magnetometer, easy to operation
  • The two-year standard warranty;Such as registration within 45 days after purchase of products, the warranty period can be extended to 4 years *

* within 45 days after purchase registered product line can be extended warranty to four years.Please visit thehttps://forms.雷竞技appfluke.com/registration-country-selectFor details.

Produc雷竞技appt specifications: Fluke T6-1000 PRO non-contact current voltage tester

function
FieldSense ac voltage Need to test lead no
range 1000 V
The resolution of the 1 V
precision Plus or minus 3% (+ 3 counts) 45 Hz - 66 Hz[1] [2]
FieldSense alternating current Need to test lead no
range 200.0 A
The resolution of the 0.1 A
precision Plus or minus 3% (+ 3 words) 45 Hz - 66 Hz
FieldSense frequency (Hz) Need to test lead no
range 45 Hz - 66 Hz
The resolution of the 1 Hz
precision (plus or minus 1% + 2 words)
Ac voltage Need to test lead is
range 1000 V
The resolution of the 1 V
precision Plus or minus 1.5% (+ 2 words) 45 Hz - 66 Hz
Dc voltage Need to test lead is
range 1000 V
The resolution of the 1 V
precision Plus or minus 1% (+ 2 words)
resistance All need to test lead (range) is
range 2000 Ω
The resolution of the 1 Ω
range 20.00 k Ω
The resolution of the 0.01 k Ω
range 100.0 k Ω
The resolution of the 0.1 k Ω
Precision (all range) Counting (plus or minus 1% + 2)

precision[1]: - (% of [reading] + [least significant digit value]).precision在校准后一年内适用,工作温度为 18 °C 至 28 °C(64 °F 至 82 °F),相对湿度至 90 %。AC 转换:交流耦合,RMS 响应。

precision[2]: FieldSense rules for 16 v to 1000 v.

General technical indicators
The calibration 1 year calibration cycle
size 61 mm x 259 mm x 43 mm
The weight of the 0.35 kg (0.78 lb)
Jaw opening 17.8 mm (0.7 ")
The temperature
Work:
Storage:

- 10 ° C to + 50 ° C (14 ° F to 122 ° F)
- 30 ° C to + 60 ° C (22 ° F to 140 ° F) + -
At an altitude of
Work:
Storage:

2000 metres (6562 feet)
10000 metres (32808 feet)
Relative humidity 0% to 90%, 5 ° to 30 ° C C (41 ° F to 86 ° F)
0% to 75%, 30 ° C to 40 ° C (86 ° F to 104 ° F)
0% to 45%, and 40 ° C to 50 ° C (104 ° F to 122 ° F)
The battery
Type:
Working hours:

2 x (IEC LR6 AA)
The continuous running 360 hours, using FieldSense function usually can run 200 hours
The temperature coefficient of 0.1 x (specified accuracy) / ° C, in 18 ° C or > < 28 ° C (< 64.4 ° F or > 82.4 ° F)
security
General:
measurement
PRO: T6-1000.

IEC 61010-1: pollution level 2

IEC 61010-2-032: the CAT III 1000 V, 600 V/CAT IV
Electromagnetic compatibility IEC/EN 61326-1: easy to carry

Mode雷竞技appl: Fluke T6-1000 PRO non-contact current voltage tester

雷竞技appPRO Fluke T6-1000

雷竞技appFluke T6-1000 PRO non-contact current voltage tester

Include:

  • A pair of pens and installed in the watch body (removable), 4 mm probe with removable cap
  • Black AC285 SureGrip ™ alligator clip
  • H - T6
  • User documentation
雷竞技appPRO HS1 Fluke T6-1000

Mod雷竞技appel: Fluke T6-1000 PRO HS1 clip-on table

Include:

  • 雷竞技appFluke T6-1000 PRO clip-on table one
  • A pair of pens and has been installed on the clamp unit body (removable), 4 mm probe with removable cap
  • Black AC285 SureGrip ™ alligator clip
  • H - T6
  • IPHS1 crosshead insulation with a screwdriver