雷竞技appFluke 368 / CN and 368 FC/CN microamps level true RMS leakage current clamp table
The main features
- True RMS measurement can guarantee complex, non sinusoidal waveform measurement accuracy
- 40 mm clamps
- The highest resolution of 1 mu A, minimum range as low as 3 ma (the maximum measured current for 60 A)
- Can choose to open the filter function, eliminating non-working spectrum of noise
- The maximum/minimum average readings and maintain function
- Prior to the LED work light, can assist in the darkness of the wiring closet
- With backlit display;Automatic backlight closed and automatic shutdown function, can extend battery life
- The CAT III 600 v safety level
- Internal storage record: up to 65000 points
Produc雷竞技appts overview: Fluke 368 / CN and 368 FC/CN microamps level true RMS leakage current clamp table
Reduce downtime - find the leakage current, no equipment on the production line will be removed
雷竞技appFluke 368 FC true RMS leakage current clip-on table can help the user to continue testing, archiving, record, and compare the leakage current reading, to prevent unplanned downtime, timely find the GFCI and RCD intermittent trip, all of these are no equipment on the production line will be removed.
雷竞技appFluke 368 FC has tong mouth diameter of 40 mm, can be used with large wire.Clamp table clamp block completely, can accurately capture the leakage signal is very weak, also can be as much as possible to reduce the external electromagnetic interference.
368 FC can a雷竞技applso through the Fluke Connect wireless data connection.As the large s雷竞技appoftware system - Fluke Connect ® part of paragraph and has more than 40 368 FC wireless test tools allow you to continue to track the change of leakage current, which helps to determine potential failure, avoid because small problems caused serious fault.
* in addition to the FC and related functions, 368 have the same electrical performance and 368 FC and the measurement function.
Produc雷竞技appt specifications: Fluke 368 / CN and 368 FC/CN true RMS leakage current clamp table microampere level
| Electrical technical indicators | ||
| Measurement functions | Alternating current | |
| Alternating current range | 3 mA, mA, mA, 300, 3 A, 30, 60, A A | |
| Range to choose | MA/A: manually choose 3 mA / 30 mA / 300 mA: automatic selection 3 A/A / 30 60 A: automatic selection |
|
| Range/resolution | 3 mA creates / 0.001 mA | |
| 30 mA / 0.01 mA | ||
| 300 mA / 0.1 mA | ||
| 3 A / 0.001 A | ||
| 30 A / 0.01 A | ||
| 60 A / 0.1 A | ||
| Accuracy - active filter (40 to 70 Hz), close the filter (40 to 1 kHz) squared | 3 mA - 30 A A 60 |
1% + 5 2% + 5 |
| frequency | 40 Hz to 1 kHz | |
| Peak coefficient | = "3" | |
| After calibration, the accuracy of the valid for one year.Accuracy is expressed as plus or minus (+ % readings digits) reference temperature condition for 23 + / - 5 ° C, maximum relative humidity is 80%. Creates A minimum of 10 mu A true RMS. 18 ° C squared beyond the TC / ° C to 28 ° C, 0.02 + 1 |
||
| Characteristics of the body | ||
| Display (LCD) | The digital reading: 3300 words | |
| Display update rate | 4 times per second | |
| The biggest diameter of wire can be obtained | 40 mm | |
| size | 46 mm 234 x 101 x | |
| The weight of the | 500 g | |
| The battery | 2 AA, IEC LR6, NEDA 15 a, alkaline | |
| Battery life | Without using a backlight and under the condition of the spotlight, is expected to more than 150 hours of battery life | |
| Automatic shutdown | Clamp table will automatically shut down after 15 minutes without operation | |
| Safety and environmental regulations | ||
| General safety | IEC 61010-1: pollution level 2 | |
| Measurement of safety | IEC 61010-2-032:600 V / 300 V IV CAT CAT III | |
| Working temperature | - 10 ° C to + 50 ° C | |
| Storage temperature | To 40 ° C to + 60 ° C | |
| Working humidity | No condensation (< 10 ° C) | |
| 90% relative humidity (10 ° to 30 ° C) C | ||
| 75% relative humidity (30 ° C to 40 ° C) | ||
| 45% relative humidity (40 ° C to 50 ° C) | ||
| Protection grade | IEC 60529: IP30 (jaw closed) | |
| Work at an altitude of | 2000 m | |
| For altitude | 12000 m | |
| Current sensor action category | IEC 61557-13:2 classes, 30 A/m or less | |
| Electromagnetic compatibility (EMC) | ||
| The international standard | ||
| IEC 61326-1 | Industrial electromagnetic environment | |
| CISPR 11 | Group 1 B class | |
| Group 1 | Need to produce and/or inside the equipment using rf energy associated with divine energy, it is necessary for equipment's own internal functions. | |
| Class B | Equipment is suitable for household appliances as well as directly connected to arbitrarily for residential buildings of the low voltage power network equipment.When this equipment is connected to the test objectives, may exceed CISPR 11 requirements stipulated in the emission level. South Korea (KCC) : device type (industrial) radio and communications equipment |
|
| A grade | This product meet the requirements of industrial electromagnetic equipment, vendors or the user should be paid attention to.This equipment is designed for the business environment and nonresidential environment. USA (FCC) : 47 CFR part 15 B.On the basis of the provisions of section 15.103, this product can be regarded as tax-free equipment. |
|
Mode雷竞技appls: Fluke 368 / CN and 368 FC/CN microamps level true RMS leakage current clamp table
- Leakage current clamp table
- Soft, portable package
- Safety manual
- Battery: 2 AA
雷竞技appFluke 368 CN true RMS leakage current clamp table microampere level
- Leakage current clamp table
- Soft, portable package
- Safety manual
- Battery: 2 AA
