雷竞技appFluke Networks LinkIQ ™ industrial Ethernet cable/network tester
The main features
- For EtherNet/IP, PROFINET, EtherCAT, verify the rate is as high as 10 gbase -t cable performance
- Get connected data rate, switch name, port and VLAN
- Detection of PoE level (1-8) and power, and perform load testing
- Perform cables, including length measurement, the diagnosis
- Through LinkWare ™ PC management result and print the report
Produc雷竞技appts overview: Fluke Networks LinkIQ ™ industrial Ethernet cable/network tester
LinkIQ ™ can measure the length of 1000 ft (305 m) cables, and provide with open circuit and short circuit points and termination cable, etc. The distance of the point of failure.
The attached MS - IE remote adapter can find RJ45, M12X, M12D and M8D termination cable connection errors and take out stitches points to.
LinkIQ ™ support EtherNet/IP, PROFINET, EtherCAT and other industrial EtherNet, and to prove that 10 base-t to 10 gbase -t (10 Mb/s to 10 Gb/s) is in line with the wiring of the bandwidth requirements, also provide the recent exchange of diagnostic information (including name of nominal data rate, switches, port and VLAN information) and up to magnitude 8 (90 w) of PoE testing and load testing.
Including LinkIQ ™ host, Remote ID # 1, RJ45 - RJ45 jump line (M - F), RJ45 - RJ45 jump line (M - F), quick reference guides, ac charger, RJ45/11 universal connector, RJ45 / M12X jumper, RJ45 / M12D jumper, RJ45 modular adapter/M8D jumper, RJ45/11, with Remote ID clip hanging belt, handbag (portable package).
Produc雷竞技appt specifications: Fluke Networks LinkIQ ™ industrial Ethernet cable/network tester
| function | instructions |
| The user interface (UI) language support | English (SW v1.0) |
| The weight of the | 1 LBS. 6 oz (624 g) |
| The battery | Type: lithium-ion batteries, 3.6 V, 6400 mAh Battery life: 8 hours (standard) Charging time: 4.5 hours Charging temperature range: 0 ° C to + 40 ° C |
| The power adapter | Input: 100-240 VAC plus or minus 10%, 50/60 hz Output: 15 VDC, maximum 2 A Class II |
| The host interface | USB C |
| display | 800 x 480 capacitive multi-touch screen color |
| size | 8.5 in x 4.5 in |
| Working temperature | 0 ° to 45 ° C C |
| Storage temperature | - 10 ° C to + 60 ° C |
| The work of relative humidity | 0% - 90% (0 ° C - 35 ° C) 0% - 70% (35 ° to 45 ° C - C) |
| Work at an altitude of | 4000 m ( When using the ac power adapter is 3200 m) |
| vibration | Random, 2 g, 5 Hz - 500 Hz |
| fall | 1 m drop, 6 |
Active network diagnosis
| function | instructions |
| Diagnostic protocol | The link layer discovery protocol (LLDP) Cisco discovery protocol (CDP) Quick link pulses (FLP) |
| Recent equipment diagnostic information (available) by diagnostic agreement |
The switch name The port number The name of the VLAN Nominal data rate Nominal duplex |
| Ethernet power supply compatibility | The IEEE 802.3 af/at/bt Consultation with the hardware characteristics of the resistance between With the software consultation between the LLDP/CDP |
| Ethernet power supply diagnostic information | Nominal power rating (0 to 8) Nominal power available The wire for The characteristics of single and double characteristic diagnostic information |
| Ethernet power measurement | The load voltage (V) Load power (W) |
| Port lights flashing | Connected to a port of the light is flashing |
Cable test specification
| function | instructions |
| Test port | 8 needles shielded modular jack, 8 needles can splice modular plug (RJ45). |
| Automatic testing debugging | 10 GBASE - T, 5 GBASE - T, 2.5 GBASE - T, 1000 base-t, 100 base - TX, 10 base-t, wiring diagram only. Test speed: length of 6 seconds, apply to < 70 > md |
| Cable type | Balanced twisted-pair cabling Unshielded twisted pair Shielded twisted-pair cable To and/or 4 to 2 |
| Wiring diagram test only | Record the wiring diagram The length of each line to Take out stitches diagnosis points to The user can choose T568A or T568B Users can choose cross set (direct, a cross, cross) Test speed: 1 second, be applicable to the length of < 120 > md |
| Length (maximum) | 305 m (1000 ft) |
| Nominal speed (NVP) | The user can set |
| Audio generator | Gene雷竞技appration and Fluke Networks IntelliTone probe compatible digital audio. Generate compatible with general analog sensor analog audio. |
| Remote ID locator | Use Remote ID to identify as many as seven unique port terminal socket or office |
Mode雷竞技appl: Fluke Networks LinkIQ ™ industrial Ethernet cable/network tester
LIQ - 100 - IE industrial Ethernet cable/network tester
The attached:
- LinkIQ ™ host
- Remote ID # 1
- RJ45 - RJ45 jump line (M - F)
- RJ45 - RJ45 jump line (M - F)
- Quick reference guide
- Ac charger
- General connector RJ45/11
- RJ45 / M12X jumper
- RJ45 / M12D jumper
- RJ45 / M8D jumper
- RJ45 modular adapter / 11
- With Remote ID hanging belt clip
- Handbag (portable package)
