雷竞技appFluke Networks LinkIQ ™ cable/network tester
The main features
- Based on the frequency of measurement, verification rate is as high as 10 gbase -t cable performance
- Get connected data rate, switch name, port and VLAN
- Detection of PoE level (1-8) and power, and perform load testing
- Perform cables, including length measurement, the diagnosis
- Through LinkWare ™ PC management result and print the report
Produc雷竞技appts overview: Fluke Networks LinkIQ ™ cable/network tester
LinkIQ ™ cable/network tester is a kind of reliable solutions, is used to validate rate as high as 10 g cable performance and solve the problem of network connection.
LinkIQ ™ USES based on frequency measurement to verify the cable performance, to calculate the maximum bandwidth (10 base-t to 10 gbase - T), to ensure that the link meet performance requirements of the test.
LinkIQ ™ provides the recent exchange of diagnostic information (including name of the nominal data transmission rate, switches, port and VLAN information) and up to magnitude 8 (90 w) of PoE testing and load testing.
Additional features include: cable audio generator, ports, lights flashing, remote office locator and through LinkWare PC management function of the test result.
Including LinkIQ ™ host, Remote ID # 1, RJ45 - RJ45 jump line, ac charger, RJ45/11 common connector and portable bag.
Produc雷竞技appt specifications: Fluke Networks LinkIQ ™ cable/network tester
| function | instructions |
| The user interface (UI) language support | English (SW v1.0) |
| The weight of the | 1 LBS. 6 oz (624 g) |
| The battery | Type: lithium-ion batteries, 3.6 V, 6400 mAh Battery life: 8 hours (standard) Charging time: 4.5 hours Charging temperature range: 0 ° C to + 40 ° C |
| The power adapter | Input: 100-240 VAC plus or minus 10%, 50/60 hz Output: 15 VDC, maximum 2 A Class II |
| The host interface | USB C |
| display | 800 x 480 capacitive multi-touch screen color |
| size | 8.5 in x 4.5 in |
| Working temperature | 0 ° to 45 ° C C |
| Storage temperature | - 10 ° C to + 60 ° C |
| The work of relative humidity | 0% - 90% (0 ° C - 35 ° C) 0% - 70% (35 ° to 45 ° C - C) |
| Work at an altitude of | 4000 m ( When using the ac power adapter is 3200 m) |
| vibration | Random, 2 g, 5 Hz - 500 Hz |
| fall | 1 m drop, 6 |
Active network diagnosis
| function | instructions |
| Diagnostic protocol | The link layer discovery protocol (LLDP) Cisco discovery protocol (CDP) Quick link pulses (FLP) |
| Recent equipment diagnostic information (available) by diagnostic agreement |
The switch name The port number The name of the VLAN Nominal data rate Nominal duplex |
| Ethernet power supply compatibility | The IEEE 802.3 af/at/bt (SW v1.0) Consultation with the hardware characteristics of the resistance between With the software consultation between the LLDP/CDP |
| Ethernet power supply diagnostic information | Nominal power rating (0 to 8) Nominal power available The wire for The characteristics of single and double characteristic diagnostic information |
| Ethernet power measurement | The load voltage (V) Load power (W) |
| Port lights flashing | Connected to a port of the light is flashing |
Cable test specification
| function | instructions |
| Test port | 8 needles shielded modular jack, 8 needles can splice modular plug (RJ45). |
| Automatic testing debugging | 10 GBASE - T, 5 GBASE - T, 2.5 GBASE - T, 1000 base-t, 100 base - TX, 10 base-t, wiring diagram only. Test speed: length of 6 seconds, apply to < 70 > md |
| Cable type | Balanced twisted-pair cabling Unshielded twisted pair Shielded twisted-pair cable To and/or 4 to 2 |
| Wiring diagram test only | Record the wiring diagram The length of each line to Take out stitches diagnosis points to The user can choose T568A or T568B Users can choose cross set (direct, a cross, cross) Test speed: 1 second, be applicable to the length of < 120 > md |
| Length (maximum) | 305 m (1000 ft) |
| Nominal speed (NVP) | The user can set |
| Audio generator | Gene雷竞技appration and Fluke Networks IntelliTone probe compatible digital audio. Generate compatible with general analog sensor analog audio. |
| Remote ID locator | Use Remote ID to identify as many as seven unique port terminal socket or office |
Mode雷竞技appl: Fluke Networks LinkIQ ™ cable/network tester
LIQ - 100 LinkIQ cable/network tester
The attached:
- LinkIQ ™ host
- Remote ID # 1
- RJ45 - RJ45 jumper
- Ac charger
- General connector RJ45/11
- Portable package
