雷竞技appFluke 772 milliamperes process clamp type table

Need more time?

When performing 4-20 mA signal measurement don't disconnect the circuit, and save time.

You are wasting valuable time?

• By removing the line and disconnect the circuit to perform the mA measurement
• Call control room to isolate circuits
• Test the analog input/output on the console
• Rule out with mA fault of input and output device
• Repair the intermittent problems or unstable 4-20 mA loop
• Return to shop for other tools

If you are always busy雷竞技app, never enough time, then try the Fluke 772 milliampere clamp type table.These pliers type table do not need to perform some time wasting activities, can greatly save time and money.Now, you don't have to disconnect the circuit or closed system, 4-20 mA loop can diagnose and repair.

Belo雷竞技appw is a Fluke 772 clip-on table can provide some help for you:

Ma clamp table properties	application	How to save time and money
Without disconnect circuit measurement of PLC and analog I/O mA signal control system	Measuring the weak direct current (dc)	Make the process instructions associated with real physical values
Don't need to disconnect the circuit can output signal transmission device	Without disconnect circuit maintenance and diagnosis process and automation equipment	Don't interrupt the process
With extension of detachable grips table	Measurement can be performed in a narrow space	Allow measurement in all sorts of difficult circumstances
Measuring the spotlight	Light in the darkness of the chassis is difficult to find	Measurement process easier and faster
In non-contact way maximum measuring current of 99.9 mA	The broad range	In the old control system of measuring 10 to 50 mA signal
Automatically shut off the power	Automatically shut down after 15 minutes and 2 minutes backlighting and spotlight	Extend the life of the battery