雷竞技appFluke 700 HTH - 1 hydraulic hose test
The main features
- To b雷竞技appe used with Fluke HTP 700-1 test pressure port directly connected to the hose and connector
- Including fluid loss is used to avoid the tube plug and cap, without having to infusion hose.
- Easy to use finger tight since the hermetic connector.
- Under the pressure rated lower volume expansion, the pressure drop can be ignored
Produc雷竞技appts overview: Fluke 700 HTH - 1 hydraulic hose test
雷竞技appFluke 700 hydraulic hose test HTH - 1 is a working pressure of up to 10000 psi (690 bar) test hose, it has the structure of stainless steel and nylon, used to HTP Fluke - 700-1 or other hydraulic test pump connected to the device under test.
Include:
With 2 1/4 "NPT female thread output connector of the hose
Can be 1/4 "NPT female thread into 1/4" male thread 2 conversion connector (cap)
A quarter in the NPT female thread to 1/4 in. The BSP pin switch connector.
Produc雷竞技appt specifications: Fluke 700 HTH - 1 hydraulic hose test
| Machinery and general parameters | |
| material | Nylon, stainless steel, galvanized steel and nitrile rubber |
| size | 0.84 m long, with no conversion connector |
| The weight of the | 412.8 g |
| Warranty period | 1 year |
Mode雷竞技appl: Fluke 700 HTH - 1 hydraulic hose test
雷竞技appFluke 700 HTH
雷竞技appFluke 700 HTH Hydraulic hose test
- Hose and fittings to connect directly to the 雷竞技appFluke 700 HTP test pressure port
- The Output connection is 1/4 "NPT female with adapters (2) to convert to 1/4" and 1/8 "NPT male
- Instruction sheet
