雷竞技appFluke 700 HTH - 1 hydraulic hose test

The main features

To b雷竞技appe used with Fluke HTP 700-1 test pressure port directly connected to the hose and connector
Including fluid loss is used to avoid the tube plug and seal cap, without having to infusion hose
Easy to use finger tight since the hermetic connector
Under the pressure rated lower volume expansion, the pressure drop can be ignored

Produc雷竞技appts overview: Fluke 700 HTH - 1 hydraulic hose test

雷竞技appFluke 700 hydraulic hose test HTH - 1 is a working pressure of up to 10000 psi (690 bar) test hose, it has the structure of stainless steel and nylon, used to HTP Fluke - 700-1 or other hydraulic test pump connected to the device under test.

Thr雷竞技appough the Fluke 700 HTH - 1, can be Fluke 700 hydraulic test pump pressure at the same time and the Fluke HTP - 1 module is connected to a device under test calibration.700 HTH - 1 is suitable for conveying water and non corrosive oil.

Produc雷竞技appt specifications: Fluke 700 HTH - 1 hydraulic hose test

The mechanical and general specifications
The minimum bending radius	60 mm / 2.36 in.
The temperature	To 40 ° C to + 120 ° C, (40 ° F to 250 ° F) + -
material	Nylon, stainless steel, galvanized steel and nitrile rubber
size	0.84 m (33) in length, with no conversion connector
The weight of the	412.8 g (910 oz.)
Warranty period	1 year