China

I200s alternating current clamp

  • 雷竞技appFluke i200s AC Current Clamp
  • 雷竞技appFluke i200s AC Current Clamp

The main features

  • With your oscilloscope, power quality meter or DMMS related measure is as high as 200 A alternating current (ac)
  • DMM attached adapter
  • Double range: 20 A & 200 A, 10 or 100 mV/Amp output
  • Need to cut off the circuit can obtain accurate current readings
  • Wire diameter Ø 20 mm
  • The CAT III 600 v safety level
Enquiry and booking demos

Products overview: i200s alternating current clamp

Small ac galvanic pincette table

雷竞技appClamp table is extended Fluke Fluke current tools current measurement range of the ideal.I200s is a 20 a and 200 a galvanic pincette table double current range of communication, and through a BNC connector output voltage of the insulation safety.Provided by a double turn BNC adapter can let i200s through banana banana joint input end is connected to the multimeter.

Product specifications: i200s alternating current clamp

Technical indicators
Nominal current range 20 A,
200 A
Continuous current range 0.1 A - 24 A
0.5 A - 200 - A
The biggest non-destructive current 240 A
Minimum current measurement 0.1 A
The basic accuracy 1.5% + 0.5 A
(48-65 Hz)
Readouts + basic indicators (%)
Frequencies available 40 Hz to 10 kHz
Output level 100 mV/A
10 mv/A
Safety indicators
security The CAT III, 600 V
Maximum voltage 600 V AC
Machinery and general technical indicators
The quality assurance 1 year
Maximum conductor diameter 20 mm
The largest conductor size (bus) 20 x 5 mm
The output cable length 2 m.
BNC adapter There are
BNC banana connector adapters
The standard		 There are

Model: i200s alternating current clamp

FLK - i200s
Alternating current clamp