雷竞技appFluke i3000s Flex type AC current clamp table, 4 suites

The main features

Three ranges
- 30 A
- 300 A
- 3000 A, 1, 10 or 100 mV/A output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor diameter 178 mm (7) in
The CAT III 600 V safety rating

Produc雷竞技appts overview: Fluke i3000s Flex type AC current clamp table, 4 suite

I3000s Flex is a adopts the principle of AC Rogowski current clamp table.When used with oscilloscope, recording instrument or data recorder, it can measure up to 3000 a current.Flexible light measuring head allows the user to quickly and easily measured in inaccessible places.

Three range: 30 A and 300 A and 3000 A.1, 10 or 100 mV/A output
Very suitable for measuring is not easy to close on the coarse wire of electric current, without having to cut off the circuit
The largest wire diameter of 178 mm
The CAT III 600 V safety certification

Produc雷竞技appt specifications: Fluke i3000s Flex type AC current clamp table, 4 suite

Electrical specifications
Current range	30 A
	300 A
	3000 A
	AC RMS
The output sensitivity (exchange coupling)	100 mV
	10 m.
	1 mV/A
The load impedance	Minimum 100 k Ω
precision	+ 25 ° C temperature
precision	The range of + / - 1% (45 Hz - 65 Hz)
linearity	From 10% to 100% range
linearity	Readings of plus or minus 0.2%
noise	8 mV AC RMS (30 A)
noise	2 mV AC RMS (300 A, 3000 A)
Frequency range	10 Hz to 50 kHz (3 dB)
Phase error	"Plus or minus 1 ° (45 Hz - 65 Hz)
Phase error	Plus or minus 10 ° (20 kHz)
Position the sensitivity	From the connection point at the beginning of the cable length > 25 mm
Position the sensitivity	Range of plus or minus 2%
Field effect	Starting from the measuring head when cable length > 200 mm
Field effect	Range of plus or minus 1%
The power supply	2 AA/MN 1500 / LR6 alkaline batteries, 400 hours, low battery indicator
The temperature coefficient of	Readings of plus or minus 0.08% / ° C
Working voltage	See section "safety standard"
Working voltage	600 V AC RMS or DC
General technical specifications
Measuring head circumference	610 mm (24) in
Measuring head cable diameter	14.3 mm (0.56 in)
Measuring head bending radius	38.1 mm (1.5 in)
Cable length (measuring head to electronic components)	2 m (6.56 ft)
Output connection	With 0.5 m cable, terminal security BNC connectors.With 4 mm safety plug adapter
Working temperature range	- 20 ° C to + 90 ° C (4 ° F to 190 ° F) (measurement)
Working temperature range	- 20 ° C to + 85 ° C (4 ° F to 185 ° F) (electronic components)
Wide temperature range	To 40 ° C to + 105 ° C (to 40 ° F to 221 ° F) (measurement)
Wide temperature range	- 20 ° C to + 85 ° C (4 ° F to 185 ° F) (electronic components)
Working humidity	From 15% to 85% (condensate)
The weight of the	180 g (0.396 lb) (measurement)
The weight of the	190 g (0.419 lb) (electronic components)
Safety standards	BS EN 61010-1:2001
	BS EN 61010-2-032:2002
	BS EN 61010-031:2002
	600 Vrms, class III, pollution level 2
	Using probe on uninsulated conductor is limited to 600 V ac RMS or dc, and the frequency of 1 KHZ
EMC standard	EN 61326:1998 + A1, A2 and A3
The largest wire size can be obtained	610 mm or 914 mm, depending on the model