China

I3000s Flex - 24 AC current clamp table, 610 mm

  • 雷竞技appFluke i3000s Flex - 24 AC Current Clamp, 610 mm (24 in.)

The main features

  • Three range: 30 A and 300 A and 3000 A.1, 10 or 100 mV/A output
  • Very suitable for measuring is not easy to close on the coarse wire of electric current, without having to cut off the circuit
  • The largest wire diameter of 178 mm
  • The CAT III 600 V safety certification

Products overview: i3000s Flex - 24 AC current clamp table, 610 mm

I3000s Flex is a adopts the principle of AC Rogowski current clamp table.When used with oscilloscope, recording instrument or data recorder, it can measure up to 3000 a current.Flexible light measuring head allows the user to quickly and easily measured in inaccessible places.

In addition, but also in the form of a suite (a set of four) used in power quality analyzer.Click here for aFor more information.

Product specifications: i3000s Flex - 24 AC current clamp table, 610 mm

Electrical specifications
Current range 30 A
300 A
3000 A
AC RMS
The output sensitivity (exchange coupling) 100 mV
10 mV
1 mV/A
The load impedance Minimum 100 k Ω
precision + 25 ° C temperature: the range of + / - 1% (45 Hz - 65 Hz)
linearity Range of 10% to 100%, plus or minus 0.2% of reading
noise 8 mV AC RMS (30 A)
2 mV AC RMS (300 A, 3000 A)
Frequency range 10 Hz to 50 kHz (3 dB)
Phase error "Plus or minus 1 ° (45 Hz - 65 Hz)
Plus or minus 10 ° (20 kHz)
Position the sensitivity From the connection point at the beginning of the cable length > 25 mm: range of plus or minus 2%
Field effect Starting from the measuring head when the cable length > 200 mm: range of plus or minus 1%
The power supply 2 AA/MN 1500 / LR6 alkaline batteries, 400 hours, low battery indicator
The temperature coefficient of Readings of plus or minus 0.08% / ° C
Working voltage See section "safety standard" : 600 V ac RMS or dc
General technical specifications
Measuring head circumference 610 mm (24) in
Measuring head cable diameter 14.3 mm (0.56 in)
Measuring head bending radius 38.1 mm (1.5 in)
Cable length (measuring head to electronic components) 2 m (6.56 ft)
Output connection With 0.5 m cable, terminal security BNC connectors.With 4 mm safety plug adapter
Working temperature range - 20 ° C to + 90 ° C (4 ° F to 190 ° F) (measurement)
- 20 ° C to + 85 ° C (4 ° F to 185 ° F) (electronic components)
Storage temperature range To 40 ° C to + 105 ° C (to 40 ° F to 221 ° F) (measurement)
- 20 ° C to + 85 ° C (4 ° F to 185 ° F) (electronic components)
Working humidity From 15% to 85% (condensate)
The weight of the 180 g (0.396 lb) (measurement)
190 g (0.419 lb) (electronic components)
Safety standards BS EN 61010-1:2001
BS EN 61010-2-032:2002
BS EN 61010-031:2002
600 Vrms, class III, pollution level 2
Using probe on uninsulated conductor is limited to 600 V ac RMS or dc, and the frequency of 1 KHZ
EMC standard EN 61326:1998 + A1, A2 and A3
The largest wire size can be obtained 610 mm or 914 mm, depending on the model

Model: i3000s Flex - 24 AC current clamp table, 610 mm

雷竞技appFluke i3000s Flex 24
AC current clamp table, 610 mm