Produc雷竞技appts overview: Fluke i430 Flex ac current probe
I430 Flex is a Rogowski principle of ac current probe.Flexible light measuring head allows the user to quickly and easily installed in the area of remoteness, without using the battery or external power supply.
I430 current clamp table using 4 pieces type packaging, can be used in high current measurement.Flex clamp table joins in bus and large size wire or hard to get around the conductor.4 piece in cur雷竞技apprent clamp table is especially suitable for and Fluke 430 series three-phase tools such as supporting the use.
Produc雷竞技appt specifications: Fluke i430 Flex ac current probe
| General technical specifications | |
| Probe and cable material | TPE rubber, reinforced insulation |
| UL94 V - 0, color: red Munsell 7.5 | |
| R 1/14 | |
| Joint material | Polypropylene, UL94 V - 0 |
| The probe cable length | 610 mm |
| The probe cable diameter | The 12.4 mm |
| The probe cable bending radius | 40 mm |
| The output cable length | 2.5 m RG58 |
| Output connector | Security BNC connector |
| The scope of work | - 20 - to + 90 ° C |
| Storage temperature | - 40 to + 105 ° C |
| Working humidity | From 15% to 85% (condensate) |
| Protection grade (probe) | IP41 |
| Technical specifications | |
| Current range | 3000 A ac RMS |
| The output voltage (1000 A RMS, 50 Hz) | 85 mV |
| precision | Readings of plus or minus 1% |
| (@ 25 ° C, 50 Hz) | |
| Linearity (range 10% to 100%) | Readings of plus or minus 0.2% |
| Noise (10 Hz - 7 kHz) | 1.0 mV ac RMS |
| Output impedance | Minimum 82 Ω |
| The load impedance | 50 k Ω |
| Each internal resistance of the probe length of 100 mm | 10.5 Ω plus or minus 5% |
| Width (3 db) | 10 Hz to 7 kHz |
| Phase error (45-65 Hz) | Plus or minus 1 ° |
| Position the sensitivity | Maximum plus or minus 2% of reading |
| The temperature coefficient of | The biggest readings of plus or minus 0.08% / ° C |
| Working voltage (see section "safety standard") | 1000 V AC RMS or DC (measurement) |
| A maximum of 30 V.(output) | |
| Safety specifications | |
| Safety standards | BS EN 61010-1 2001 |
| BS EN 61010-2-032-2002 | |
| BS EN 61010-031, 2002100 VRMS, class III, the pollution level 2 | |
| Using probe on uninsulated conductor is limited to 1000 V ac RMS or dc, and the frequency of 1 KHZ. | |
| Please note that the p雷竞技approbes are used together with other products, suitable for and the Fluke 435 systems | |
| Output terminal earthing safety level limit of 600 V AC RMS or DC. | |
Mode雷竞技appl: Fluke i430 Flex ac current probe
雷竞技appFluke i430
