雷竞技appFluke i5sPQ3, 5 A alternating current clamp table, 3 pieces
The main features
- Low accuracy of current clamp table can measure up to 5 a alternating current (ac)
- Compact appearance and convenient transport and storage;Clamp table size only 43 x 116 x 23 mm (4. 6 x 1.7 x. 9 in)
- Don't need to cut off the circuit can obtain accurate readings
- The CAT III 600 V (only applicable to insulated conductor)
Produc雷竞技appts overview: Fluke i5sPQ3, 5 A alternating current clamp table, 3 pieces
3 pieces i5s current clamp table designed to provide low current precision and design, to measure the secondary inverter at the same time.Save the cost of 3 p雷竞技appiece in current clamp table is especially suitable for with 434 or Fluke Fluke 435 three-phase tools such as supporting the use.
Produc雷竞技appt specifications: Fluke i5sPQ3, 5 A alternating current clamp table, 3 pieces
| Technical specifications | ||
| Rated current range | 5 A | |
| Continuous current range | 10 mA to 6 A | |
| Most current nondestructive | 70 A | |
| The minimum current can be obtained | 10 mA, | |
| The basic accuracy | 48 Hz - 65 Hz | |
| 10 mA to 1 A | 1% + 5 mA | |
| 1 A to 5 A | 1% | |
| Frequencies available | 40 Hz to 5 kHz | |
| The output value | 400 mV/A | |
| Input and load impedance | Shunt impedance Ω > 1 M, the highest 47 pF | |
| Peak coefficient | 3 or less, the measurement accuracy is increased by 0.7% | |
| Safety specifications | ||
| Security level | According to the IEC/EN61010 level 1 600 V for CAT III, pollution level 2 | |
| Maximum voltage | 600 V AC | |
| The mechanical and general specifications | ||
| Warranty period | 1 year | |
| The biggest diameter of wire can be obtained | 15 mm | |
| The output cable length | 2.5 m | |
| BNC adapter | is | |
| The attached BNC banana connector adapters | no | |
Mode雷竞技appl: Fluke i5sPQ3, 5 A alternating current clamp table, 3 pieces
雷竞技appFluke i5sPQ3
I5sPQ3, 5 A alternating current clamp table, 3 pieces
